User's Manual

74
Connecting the Sensor to your Computer
To connect your Sensor to your computer, do the following:
1. Plug the small end of the supplied adaptor cable into the receptacle on the left side of
the Sensor.
2. Plug the other end of the cable into an available USB port on your computer.
Your computer will recognize the Sensor as being connected via a new serial
communications port.
Using the Sensor Digital RC Desktop
To start the RC Desktop
From the START menu, click (All) Programs, Nomadio Digital RC Desktop,
then Nomadio Digital RC Desktop.
To make changes to the
settings
Navigate through the functions of the RC Desktop, and make changes as
appropriate to global settings, or to settings for individual models.
To open a saved settings file
From the File menu, click Open….
To save the current settings
into a file
From the File menu, click Save.
To receive the current
settings from the Sensor
1. Connect the Sensor to your computer.
2. Turn on the Sensor.
3. From the File menu, click Receive Settings from Sensor.
To send the RC Desktop’s
current settings to the Sensor
1. Connect the Sensor to your computer.
2. Turn on the Sensor.
3. From the File menu, click Send Settings to Sensor.
To install the latest firmware
into the Sensor
1. Connect the Sensor to your computer.
2. Turn on the Sensor.
3. From the Firmware menu, click I nstall Latest Firmw are.
To install firmware from a file
into the Sensor
1. Connect the Sensor to your computer.
2. Turn on the Sensor.
3. From the Firmware menu, click I nstall Firmware from File.
To update the RC Desktop to
the latest version
From the Help menu, click Software Updates.