User's Manual

80
Specifications
* Specifications subject to change without notice.
Sensor Controller
Radio Type: digital spread spectrum 2.4Ghz
Radio Mode: direct sequence spread spectrum
Range: 1000ft. (approximate)
Frame Rate: 100 frames per second
Latency: 10 millisecond max, 5ms typical
Dimensions: 300mm x 139mm x 125mm (HWD)
Weight (w/Batteries): 674g
Servo Channels: 4
Rechargeable Batteries: NiMH (included)
Charger: included
Model Memory: 8 named, custom graphics and sound
Controller Battery Voltage Monitor: graphic and real-
time
Car Battery Voltage Monitor: graphic and real-time
Timers: operation and lap timers
Trims: adjustable trims and sub-trims
Controls: dual rate, endpoints, exponential, mixing
and servo speed adjust on all channels
Anti-Lock: brake anti-lock with cycle, delay, and depth
Idle Up: yes
Speaker: .75” w/headphone jack
Audio: programmable WAV file audio and tones
Tactile Alarm: programmable vibrator
Display: movable backlit monochrome LCD
Resolution: 128 x 64 pixels
Auto Modes: auto display and display only
Presets: failsafe and autostart
Telemetry: 3 channels of real time telemetry
Telemetry Sensors: speed, temperature and battery
Servos Supported: any combination of analog and
digital
Left-Handed Operation: yes (user modifiable)
PC Connectivity: USB serial for customization,
analysis and updates
Antenna: fixed 3” antenna
Architecture: software upgradeable
Transceiver
Dimensions: 47.7 x 30.2 x 19mm
Weight: 34g (including antenna)
Antenna length: 22.8cm
Antenna thickness: 1.8mm