User's Manual

Steering (Ch1)
Throttle (Ch2)
Shift (Ch3)
Ch
4
Steering Tri
m
On the driving screen, steering
trim is represented by the
position of the pointer on the
upper bar.
As you change the steering trim, it is shown graphically on the driving screen trim indicator bars:
Steering trim is centered in range (value = 0)
Steering trim is offset to the RIGHT (+ve value
Steering trim is offset to the LEFT (-ve value)
If you find that you have to use a large amount of steering trim to get the vehicle to drive straight, you
should consider resetting the steering trim to 0 and re-adjusting the servo horn on the servo output
shaft.
Adjusting Steering Trim using the Function Menu
Use the navigation controls to adjust steering trim as follows:
1. Access the top function menu from
the driving screen.
2. Navigate to the Steering (Ch1) menu.
or then
3. Navigate to Trim.
or
Value Description
0 Steering trim is centered within the servo
range.
-ve value
(-100 Æ -1)
Steering trim is to the LEFT.
4. Change the value.
or
+ve value
(1 Æ 100)
Steering trim is to the RIGHT.
Adjusting Steering Trim using the Steering Trim Buttons
Push the trim button forward to advance the trim, backward to reduce it.
A trim (or sub-trim) setting of 100 is equivalent to an End point setting of 50.