User's Manual

Steering Dual Rate
Steering dual rate adjusts the
range of servo movement when
the steering wheel is fully turned
in either the left or right
direction. This is used to increase
or decrease the steering
sensitivity across the entire servo
range. The steering dual rate
value is applied to both left and
right sides, and is expressed as a
percentage of servo range
(configured by end point
adjustments).
Steering (Ch1)
Throttle (Ch2)
Shift (Ch3)
Ch4
Dual Rate Range
On the driving screen, steering dual rate range is
represented by the solid length of the upper bar.
The total length of the bar (solid and dotted)
represents the servo range. The length of the solid
bar represents the range set by the dual rate value.
As you change the dual rate setting it is shown graphically on the driving screen trim indicator bars:
Full servo range is used.
Lower dual rate value reduces servo range.