User's Manual

Steering Right End Point
The steering right end point
value adjusts how far the
steering servo turns to the
RIGHT with respect to its full
range of motion to the right. End
point adjustment should be
adjusted prior to other steering
settings, as the right end point
value affects other steering
settings.
The right end point is set independently of the left end point (which adjusts how far the steering servo
turns to the LEFT). The right end point setting should be used to do the following:
Limit steering throw to reduce mechanical binding or servo strain that may occur on full servo throw to
the right. For example, if the servo is trying to turn the steering system to the right farther than it is
mechanically able.
Adjust steering throw to change steering characteristics when turning to the right.
For example, if your car is oversteering when turning to the right, then reduce the Right End Point
value to reduce the range of the steering servo on the right.
Steering (Ch1
Throttle (Ch2)
Shift (Ch3)
Ch4
Right End Point
On the driving screen, the right end point is
represented by the length of the bar to the right of
the pointer on the upper bar.
The greater the right length of the bar, the greater
the right end point value.
The position of the pointer on the bar is affected
by the end point values (left and right) and trim
setting.
Changing the right end point value has the following visual effect on the driving screen bars.