User's Manual

3. Navigate to Servo Type.
or
Value Description
Analog Steering servo is analog.
4. Change the value.
Digital Steering servo is digital.
Steering Speed
Steering speed allows you to limit the maximum
speed that the steering servo will be driven to
match your movements on the wheel. There are
three parameters that can be adjusted to precisely
set up your limiting.
Trigger sets the minimum amount of control input
before the speed limiter becomes active. At 0%,
limiting is always active (input is always >= 0%).
At 50%, limiting is only active if the wheel is
turned half way or more.
Input speed determines the limited speed that is
applied to motions away from center that are
above the trigger setting. 100 is the maximum
servo movement rate. 1 is the minimum rate.
Default is 100 (full speed)