User's Manual

Return speed determines the limited speed that is
applied to motions back toward center that are
above the trigger setting. 100 is the maximum
servo movement rate. 1 is the minimum rate.
Default is 100 (full speed)
Changing the Steering Speed
Interaction with other parameters
Servo Speed is applied after Expo. The trigger level for Servo Speed refers to the curved input value.
Use the navigation controls to change the steering servo type as follows:
1. Access the top function menu from
the driving screen.
2. Navigate to the Steering (Ch1) menu.
or then
3. Navigate to Steering Speed.
or
Value Description
4. Change the values.
or
Input
Speed
The percentage of full speed applied to servo
motion away from center once the trigger amount
has been exceeded.