User's Manual

Adjusting Throttle Trim using the Trim Button
You can also use the T3 trim button to adjust throttle trim.
Trim and EPA Interaction
A trim (or sub-trim) setting of 100 is equivalent to an End point setting of 50.
Throttle Dual Rate
Throttle dual rate adjusts the
range of servo movement when
the throttle trigger is moved from
full brake to full throttle position.
This is used to increase or
decrease the throttle sensitivity
across the entire servo range.
The throttle dual rate value is
applied to both throttle and brake
end, and is expressed as a
percentage of servo range
(configured by end point
adjustments).
Throttle Dual Rate Range
On the driving screen, throttle
dual rate range is represented by
the solid length of the middle
bar.
The total length of the bar (solid
and dotted) represents the servo
range. The length of the solid bar
represents the servo range set by
the dual rate value.
Changing the dual rate setting has the following visual effect on the driving screen bars:
Full servo range is used.
Lower dual rate value reduces servo range.