User's Manual

Throttle Sub-Trim
Throttle sub-trim adjusts the
center point of the throttle servo.
This differs from throttle trim in
that throttle sub-trim adjusts the
servo’s entire travel range; by
moving the center point of the
servo, the throttle and brake end
points (throttle, brake) stay the
same relative “distance” from the
servo center.
Throttle sub-trim should be
initially adjusted before using
throttle trim, which is used to
make fine adjustments to center
the throttle within the total
steering range.
If you find that you have to use a large amount of throttle sub-trim to adjust the throttle position, you
should consider resetting the steering sub-trim to 0 and re-adjusting the servo horn on the servo output
shaft.
Adjusting Throttle Sub-trim
Use the navigation controls to adjust throttle sub-trim as follows: