User's Manual

1. Access the top function menu from
the driving screen.
2. Navigate to the Throttle (Ch2) menu.
or then
3. Navigate to Sub Trim.
or
Value Description
0 Throttle sub-trim is centered within the servo
range.
-ve value
(-100 Æ -1)
Throttle sub-trim is to the BRAKE end.
4. Change the value.
or
+ve value
(1 Æ 100)
Throttle sub-trim is to the THROTTLE end.
Trim and EPA Interaction
A trim (or sub-trim) setting of 100 is equivalent to an End point setting of 50.
Adjusting Throttle Dual Rate Increment
Use the navigation controls to adjust throttle dual rate increment as follows:
1. Access the top function menu from
the driving screen.
2. Navigate to the Throttle (Ch2) menu
or then
3. Navigate to DR Increment.
or
Value Description
4. Change the value.
or
1-20
Throttle dual rate value changes by set
increment.
Use smaller values for finer dual rate control.
Use larger values for coarser dual rate
control.