User's Manual

Throttle End Point
The throttle end point value
adjusts how far the throttle goes
to the THROTTLE end with
respect to its full range of motion
to the throttle end. End point
adjustment should be adjusted
prior to other throttle settings, as
the throttle end point value
affects other throttle settings.
The throttle end point is set
independently of the brake end
point (which adjusts how far the
throttle servo turns to the
BRAKE end).
The throttle end point setting should be used to do the following:
Limit throttle throw to reduce mechanical binding or servo strain that may occur on full servo throw to
the throttle end. For example, if the servo is trying to pull a mechanical throttle linkage farther than it is
mechanically able.
Adjust throttle range to reduce the top speed of the vehicle.
On the driving screen,
the throttle end point
is represented by the
length of the bar to
the right of the
pointer on the middle
bar. The greater the
right length of the
bar, the greater the
throttle end point
value.
The position of the
pointer on the bar is
affected by end point
values (throttle and
brake) and trim
setting.
Steeri
n
Throttl
Shift (
C
Ch4
Throttle End Point
Steeri
n
Throttl
Shift (
C
Ch4
Throttle End Point