User's Manual

Trim and EPA Interaction
A trim (or sub-trim) setting of 100 is equivalent to an End point setting of 50.
Throttle Dual Rate Mode
Dual Rate Mode controls the behavior of the Dual
Rate setting for the throttle servo.
Changing the Throttle Dual Rate Mode
Use the navigation controls to change the dual rate mode as follows:
1. Access the top function menu
from the driving screen.
2. Navigate to the Throttle (Ch2)
menu.
or then
3. Navigate to DR Mode.
or
Value Description
Both Dual rate affects travel in both direction
Throttle
Dual rate affects throttle travel only. Useful to limit
throttle inputs early in a run with an electric model.
4. Change the value.
or
Brake
Dual rate affects brake travel only. Useful to adjust
brakes on a nitro vehicle without affecting throttle travel.
Throttle Servo Reverse
Throttle servo reversing reverses
the direction the throttle servo
moves upon receiving an input
from the throttle trigger.
Changing the Throttle Servo Reverse Setting
Use the navigation controls to change the throttle servo reverse setting as follows: