Instructions / Assembly

1
MOVIE SCREEN™ INSTRUCTION SHEET
IMPORTANT SAFETY INSTRUCTIONS
When Using Electrical Products, Basic Precautions Should Always Be Followed Including The Following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
1. Do not use products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor
applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a
qualified electrician for proper installation.
2. This product is not intended for permanent installation or use.
3. Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
4. Do not secure product wiring with staples or nails or place on sharp hooks or nails.
5. Unplug the product when leaving the house, when retiring for the night, or if left unattended.
6. This is an electrical product – not a toy! To avoid risk of fire, burns, personal injury, and electric shock, it should not be
played with or placed where small children can reach it.
7. Do not use this product for other than its intended purpose.
8. Do not hang ornaments or other objects from cord, wire.
9. Do not close doors or windows on the product, or extension cords, as this may damage the wire insulation.
10. Do not cover the product with a cloth, paper, or any material not part of the product when in use.
11. This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This
plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If the plug still
does not fit, contact a qualified electrician. Do not use an extension cord unless the plug can be fully inserted. Do not alter
or replace the plug.
12. This product employs overload protection (fuse). A blown fuse indicates an overload or a short-circuit condition. If the fuse
blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product markings
for proper fuse rating) and check the product. If replacement fuse blows, a short-circuit may be present and the product
should be discarded.
13. Before using and reusing, inspect the product carefully. Discard any products that have cut, damaged or frayed wire
insulation cords, cracks, lamp holders or enclosures, loose connections, or exposed copper wire.
14. Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS
USE AND CARE INSTRUCTIONS
1. Before using and reusing, inspect the product carefully. Discard any products that have cut, damaged or frayed wire
insulation cords, cracks, enclosures, loose connection, or exposed copper wire.
2. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to
avoid any undue strain or stress on the product conductors, connections and wires.
3. When not in use, store neatly in a cool, dry location protected from sunlight.
WARNING: Protect the electric fan and power cord from direct exposure to water. This precaution will reduce the
risk of electrical shock. When the temperature is below 14°F (-10°C), the motor may temporarily stop running. The motor will
begin functioning again in higher temperatures.
WARNING: Remove all plastic fasteners and tags. These are part of the packaging and should be discarded.
WARNING: This product is to be assembled by adults only.
CAUTION: Do not attempt to inflate your Airblown
®
Inflatable Movie Screen™ during unusually strong winds. If it
becomes too windy for safe operation, simply allow your Airblown
®
Inflatable Movie Screen™ to deflate and wait for better
conditions before re-inflating.
E