Installation guide

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Assembly - Attaching the Light Kit

Attaching the light kit

Attaching the glass shades

and bulbs

□ Remove the three screws (QQ) from the black bracket below

the fan motor assembly (D).

□ Connect the wires exiting the bottom of the motor assembly

(D) by connecting the molded adaptor plugs (SS) together.

□ Slide the switch cup light kit (E) and secure it to the black

bracket using the three screws (QQ) that were removed in

the rst step.

□ Insert the glass shade (I) into the glass holder by carefully

squeezing the steel tensioners (TT) on the light xture

together.

□ Gently slide the glass shade (I) over the steel tensioners

(TT). Make sure the glass shade is fully inserted into the

socket for a secure t. Repeat for the remaining glass

shades.

□ With the power off, install the light bulbs (J) (Max. 14W,

provided) into the light bulb sockets.

CAUTION: To reduce the risk of electric shock, disconnect

the electrical supply circuit to the fan before installing the

light kit.

CAUTION: Make sure the power is off before attaching or

removing the glass shades.

WARNING: Allow the glass shade to cool completely before

removing.

PAGE 1
Assembly - Attaching the Light Kit 9 10 Attaching the light kit CAUTION: To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan before installing the light kit. CAUTION: Make sure the power is off before attaching or removing the glass shades. □□ Remove the three screws (QQ) from the black bracket below □□ □□ WARNING: Allow the glass shade to cool completely before removing. the fan motor assembly (D).
PAGE 2
Ensamblaje - Cómo Instalar el Kit de Luces 9 10 Cómo instalar el kit de luces PRECAUCIÓN: Para disminuir el riesgo de descarga eléctrica, desconecta el circuito de energía del ventilador antes de instalar el kit de luces. PRECAUCIÓN: Asegúrate de que la corriente esté cortada antes de montar o retirar las pantallas de vidrio. □□ Quita los tres tornillos (QQ) del soporte negro debajo del □□ □□ ADVERTENCIA: Espera que la pantalla de vidrio se enfríe completamente antes de retirarla.