User's Manual
Table Of Contents
- Guide to Symbols
- Precautions for Use
- Using the XXX Pulse Oximetry System
- Indications for Use
- General Information about Bluetooth Technology
- Installing the Battery Pack in the Display Unit
- Installing Batteries in the Pulse Oximeter Device (POD)
- Displays, Indicators, and Controls
- Setting Up the XXX System
- Verifying System Operation
- Device Pairing
- Default Settings
- Accessing User Functions
- Dislay Unit DIP switches
- Care and Maintenance
- Alarms and Limits
- Communication
- Specifications
- Parts and Accessories
- Service, Support, and Warranty
- Troubleshooting
12
Using the XXX Pulse Oximetry System
Alarm Volume LED
This amber LED indicates that the Alarm Volume can be reviewed or
adjusted using the Plus (+) and Minus (-) buttons.
Connection Status LED
This LED is lit green when a Bluetooth device is connected. It is lit
amber when no devices are connected, and it blinks during device
pairing. The Connection Status LED works in sync with the POD’s
connection status indicator.
Remote Battery Status LED
This amber LED alerts users to marginal or critical battery conditions
for the wrist-worn POD. When the POD’s batteries are marginal, this
LED blinks. When battery capacity is critical, it remains lit steadily.
AC Power Adapter LED
This green LED is displayed when an external power supply is
providing power to the XXX System.
Battery LED
This amber LED indicates a marginal battery charge when blinking.
In addition, this LED—when lit steadily—indicates that the battery
charge is being displayed. This LED does not indicate that the XXX System
is running on battery power. The battery charge indication will not be
accurate before one full charge/discharge/recharge cycle with a new
battery pack.