User's Manual
Table Of Contents
- Guide to Symbols
- Precautions for Use
- Using the XXX Pulse Oximetry System
- Indications for Use
- General Information about Bluetooth Technology
- Installing the Battery Pack in the Display Unit
- Installing Batteries in the Pulse Oximeter Device (POD)
- Displays, Indicators, and Controls
- Setting Up the XXX System
- Verifying System Operation
- Device Pairing
- Default Settings
- Accessing User Functions
- Dislay Unit DIP switches
- Care and Maintenance
- Alarms and Limits
- Communication
- Specifications
- Parts and Accessories
- Service, Support, and Warranty
- Troubleshooting
13
Setting Up the XXX System
Use the following procedure to set up the XXX Pulse Oximetry System. (Refer to
the Wrist-Worn Pulse Oximeter Device instruction insert for additional information
about using that product.)
1. Ensure that batteries are installed in the display unit and POD.
2. Plug in and connect the AC adapter for the display unit.
3. Press the ON/STANDBY button to turn on the display unit.
4. Verify operation of the display unit, and pair the display unit with the desired
wrist-worn POD. (See “Verifying System Operation” and “Device Pairing”
for more information.
5. Attach a sensor to the wrist-worn POD. (The POD is automatically activated
when a sensor is connected.)