User's Manual
Table Of Contents
- Guide to Symbols
- Precautions for Use
- Using the XXX Pulse Oximetry System
- Indications for Use
- General Information about Bluetooth Technology
- Installing the Battery Pack in the Display Unit
- Installing Batteries in the Pulse Oximeter Device (POD)
- Displays, Indicators, and Controls
- Setting Up the XXX System
- Verifying System Operation
- Device Pairing
- Default Settings
- Accessing User Functions
- Dislay Unit DIP switches
- Care and Maintenance
- Alarms and Limits
- Communication
- Specifications
- Parts and Accessories
- Service, Support, and Warranty
- Troubleshooting
18
Using the XXX Pulse Oximetry System
Accessing User Functions
The XXX System includes Basic, Set, and Advanced Functions.
Basic Functions
Basic functions are generally easy to use and involve only a single button. The XXX
System has several basic functions.
Function Button Instruction
Turn the display unit
on and off.
Press the ON/STANDBY button
to turn on the display unit. Press
and hold the button for at least one
second to turn off the display unit.
Check the battery
charge.
Press the ON/STANDBY button
while the unit is on. Battery charge
is displayed (in 12% increments, for
4 seconds in green) on the Pulse
Strength Bargraph.
Mute the audible
alarms (2 minutes—
toggle).
Press the Alarm Silence button.
Adjust the
display intensity
(brightness).
Press the Plus or Minus button.
View the last paired
device.
Press the Bluetooth Control button
during normal operation.
Invoke the print-on-
demand feature.
With DIP switch 4 in the DOWN
position, press the ON/
STANDBY button.
Invoke the event
marker.
Press the ON/STANDBY button
during real-time printing.
or
™