User's Manual
Table Of Contents
- Guide to Symbols
- Precautions for Use
- Using the XXX Pulse Oximetry System
- Indications for Use
- General Information about Bluetooth Technology
- Installing the Battery Pack in the Display Unit
- Installing Batteries in the Pulse Oximeter Device (POD)
- Displays, Indicators, and Controls
- Setting Up the XXX System
- Verifying System Operation
- Device Pairing
- Default Settings
- Accessing User Functions
- Dislay Unit DIP switches
- Care and Maintenance
- Alarms and Limits
- Communication
- Specifications
- Parts and Accessories
- Service, Support, and Warranty
- Troubleshooting
20
Using the XXX Pulse Oximetry System
Advanced Functions
Advanced functions are restricted to trained users; they require multiple button
presses in order to prevent accidental activation.
Function Button Instruction
Pair Devices Press the Bluetooth Control button while
turning on the unit. A maximum of five
“pairable” devices will be displayed, with
the device identification number appearing
in the pulse rate and SpO
2
display areas.
When the desired device’s identification
number is displayed, pressing the Bluetooth
Control button completes the pairing
process.
Retain
Previous User-
Defined Alarm
Limit Settings
Press and hold both the Alarm Limits and
ON/STANDBY buttons when turning on
the display unit.
Enter Patient
Playback and
Memory Clear
Menu
Press and hold the Memory button while
turning on the display unit. This menu
functions with NONIN’s nVISION
®
software.
+
™
+
+