User's Manual
Table Of Contents
- Guide to Symbols
- Precautions for Use
- Using the XXX Pulse Oximetry System
- Indications for Use
- General Information about Bluetooth Technology
- Installing the Battery Pack in the Display Unit
- Installing Batteries in the Pulse Oximeter Device (POD)
- Displays, Indicators, and Controls
- Setting Up the XXX System
- Verifying System Operation
- Device Pairing
- Default Settings
- Accessing User Functions
- Dislay Unit DIP switches
- Care and Maintenance
- Alarms and Limits
- Communication
- Specifications
- Parts and Accessories
- Service, Support, and Warranty
- Troubleshooting
26
Alarms and Limits
Error Codes
The XXX Pulse Oximetry System includes error codes that indicate problems with
the unit. To correct error conditions, perform the following steps:
1. Turn the unit off and then back on again to remove the error code.
2. If the error persists, disconnect all power (AC and battery), and then
reconnect the power and turn the unit back on.
3. If the error still persists, note the error code and contact your distributor, or
contact Nonin Customer Support at (800) 356-8874 (USA and Canada) or
+1 (763) 553-9968.