User's Manual
Table Of Contents
- Guide to Symbols
- Precautions for Use
- Using the XXX Pulse Oximetry System
- Indications for Use
- General Information about Bluetooth Technology
- Installing the Battery Pack in the Display Unit
- Installing Batteries in the Pulse Oximeter Device (POD)
- Displays, Indicators, and Controls
- Setting Up the XXX System
- Verifying System Operation
- Device Pairing
- Default Settings
- Accessing User Functions
- Dislay Unit DIP switches
- Care and Maintenance
- Alarms and Limits
- Communication
- Specifications
- Parts and Accessories
- Service, Support, and Warranty
- Troubleshooting
30
Communication
Printing Options
The XXX Pulse Oximetry System features printing capabilities that allow
printing on demand or in real-time. These printing options are controlled by
DIP switch 4, which is found under the battery cover at the back of the unit.
• When DIP switch 4 is in the UP position, real-time (once per second) data
output is available via the RS232 connector port, using a null modem cable.
• When DIP switch 4 is in the DOWN position (default), the Print-on-Demand
mode is activated, allowing you to print only when desired.
To print displayed data on demand, press the ON/STANDBY button.
Important Notes
• Event markers are not available in Print-On-Demand mode.
• Print functions are available only with a 9600 baud serial ASCII printer.
• Printing features are not available during memory playback.