User's Manual
Table Of Contents
- Guide to Symbols
- Precautions for Use
- Using the XXX Pulse Oximetry System
- Indications for Use
- General Information about Bluetooth Technology
- Installing the Battery Pack in the Display Unit
- Installing Batteries in the Pulse Oximeter Device (POD)
- Displays, Indicators, and Controls
- Setting Up the XXX System
- Verifying System Operation
- Device Pairing
- Default Settings
- Accessing User Functions
- Dislay Unit DIP switches
- Care and Maintenance
- Alarms and Limits
- Communication
- Specifications
- Parts and Accessories
- Service, Support, and Warranty
- Troubleshooting
31
Specifications
WRIST-WORN PULSE OXIMETER (POD)
Oxygen Saturation Range
(%SpO
2
)
0% to 100%
Pulse Rate Range
18 to 300 pulses per minute
Accuracy
Blood Oxygen Saturation
(%SpO
2
) (± 1 S.D.)
a
70-100% ±2 digits for adults using Finger Clip Sensor
Pulse Rate
± 3%
Measurement Wavelengths and Output Power
Red
660 nanometers @ 3 mw nominal
Infrared
910 nanometers @ 3 mw nominal
Internal Power
Battery
Two 1.5 volt AA batteries
Operating Life
minimum 140 hours of continuous operation with new
batteries
Storage Life
10 months
Weight
4.4 ounces with batteries (125 grams)
DISPLAY UNIT
Displays
Numeric Displays
3-digit LEDs, Tricolor (red, green, amber)
Pulse Strength
Bargraph LED
Tricolor LED segments
Power Requirements
Mains
100-240 VAC 50-60 Hz
DC Input
12 VDC AC adapter
Internal Power
Battery
7.2 volt battery pack (6 cells)
Operating Life
minimum 25 hours of continuous operation with a fully
charged battery pack
Storage Life
17 days
Recharge
4 hours
Dimensions
5.5” H x 7.25” W x 4.5” D
Weight
2.2 lbs with battery
Memory
33.5 hours minimum