User's Manual
Table Of Contents
- Guide to Symbols
- Precautions for Use
- Using the XXX Pulse Oximetry System
- Indications for Use
- General Information about Bluetooth Technology
- Installing the Battery Pack in the Display Unit
- Installing Batteries in the Pulse Oximeter Device (POD)
- Displays, Indicators, and Controls
- Setting Up the XXX System
- Verifying System Operation
- Device Pairing
- Default Settings
- Accessing User Functions
- Dislay Unit DIP switches
- Care and Maintenance
- Alarms and Limits
- Communication
- Specifications
- Parts and Accessories
- Service, Support, and Warranty
- Troubleshooting
32
Specifications
SYSTEM
Temperature
Operating
50° to +104°F (10° to +40°C)
Storage/Transportation
-4° to +122°F (-20° to +50°C)
Operating Altitude
Up to 40,000 feet
Humidity
Operating
10% to 90% relative humidity, noncondensing
Storage/Transportation
10% to 95% relative humidity, noncondensing
*If transferred from a non-operating temperature and/or
humidity condition, allow at least one hour of
stabilization time before use.
Antenna Type
Inverted F type antenna
Antenna Gain
+2 dB (typ.), +3 dB (max.)
Classifications per IEC 60601- 1 / CSA601.1 / UL2601-1
Type of Protection
Class I (when on AC power with 300PS-UNIV battery
charger)
Internally powered (on battery power)
Degree of Protection
Type BF-Applied Part
Mode of Operation
Continuous
a. S.D. (Standard Deviation) is a statistical measure; up to 32% of the readings may fall outside
these limits.