User's Manual

23
System Operation
Dymo
®
Printer
The optional Dymo LabelWriter
®
SE450 printer connects to the monitor via the RS-232 port.
When the printer is connected and the RS-232 port is set to Printer, an event summary label
prints each time the Event Mark button is pressed. The label (figure 9) provides the following
information:
• Event date and time (if date and time are set correctly on the monitor).
• Event mark letter displays along with space to write a patient summary for the event.
• Ability to track if oximeter provided first alert of event.
• Space to write notes.
• Regional and pulse oximetry parameters, by channel, at the time of the event (rSO
2
,
AUC, BL, SpO
2
, and PR).
• System and preset name.
• Patient ID and bar code.
Figure 9: Sample Label from Dymo Printer
The label size is 2 5/16 x 4 inches (59 x 101 mm). Refill rolls (Dymo 30256, or compatible) are
available at office supply stores.
Using the Dymo Printer
1. Set the RS-232 port so it outputs to the Dymo printer.
a. Press Menu .
b. Press right three times to highlight the System tab. System Menu screen displays.
c. Use the navigation buttons to move to and highlight “Data Output Modes.”
d. Press Select. Pop-up window displays with Bluetooth settings highlighted.
e. Press down to highlight RS232.
f. Press Select. Small arrows display above and below the setting.
Date Time
2012-05-15 14:00:00
Event A _________________________
Oximeter First Alert? Yes No
Notes:
Regional Oximetry
# Location rSO2 AUC BL
1 L Cere --- --- --
2 R Cere --- --- --
4 Abdomen --- --- --
5 L Thigh --- --- --
6 R Thigh --- --- --
Pulse Oximetry
# Location SpO2 PR
3 R Hand 98 78
System Name - Preset Name
Patient ID 0123456789ABCDE
DRAFT 10 DEC 2012
DRAFT 10 DEC 2012