User's Manual

45
System Menu Screen
Restore Factory Defaults
This setting discards all presets, institution defaults, institution and other user settings and
returns the monitor to the factory default alarm limit settings (table 6)..
System Information
This pop-up window provides system information for the monitor and any attached signal
processors. This information may be needed if calling the Technical Service department.
Figure 18. System Information Pop-up
Date / Time
This setting is used to set the device’s date and time.
Table 9. Factory Default Alarm Limit Settings
Alarm Limit Setting Factory Default
rSO
2
High Off
rSO
2
Low (% BL) % below baseline Baseline - 25% (Baseline minus 25%)
rSO
2
Low (Abs) Absolute 50%
SpO
2
High Off
SpO
2
Low 85%
Pulse High 200 BPM
Pulse Low 50 BPM
DRAFT 10 DEC 2012
DRAFT 10 DEC 2012