User's Manual

48
System Menu Screen
Institution Password
The default institution password is 0000. The institution password may be set to any four-digit
number and is used to unlock parameter settings on the System Menu screen. The institution
password can be used to unlock saved presets.
System Menu – Procedures
Open the System Menu
1. Press Menu .
2. Press right three times to highlight the System tab. System Menu screen displays.
Adjust the Display Brightness
1. While in the System Menu screen, use the navigation buttons to move to and highlight
“Brightness.”
2. Press Select. Brightness slider displays.
3. Press up/down navigation buttons to adjust the setting.
4. Press Select to save the setting. Display returns to System Menu screen.
5. Change additional settings, press Menu twice to return to monitoring screen, or allow the
screen to time out.
Adjust the Alarm Volume
1. While in the System Menu screen, use the navigation buttons to move to and highlight
“Alarm Volume.”
2. Press Select. Alarm volume slider displays.
3. Press up/down navigation buttons to adjust the setting.
• Green slider — volume is above 45 decibels (steps 5 – 15).
• Yellow slider — volume is below 45 decibels and the alarm silence indicator displays on
the monitor (steps 0 – 4).
4. Press Select to save the setting. Display returns to System Menu screen.
5. Change additional settings, press Menu twice to return to monitoring screen, or allow the
screen to time out.
Set the rSO
2
Low Alarm Mode
1. While in the System Menu screen, use the navigation buttons to move to and highlight
“rSO
2
Low Alarm Mode.”
2. Press Select. Pop-up menu displays.
3. Press up/down navigation buttons to change the setting.
• % Below Baseline (% BL)
• Absolute (Abs)
WARNING: Ensure all alarm volumes are set appropriately and are audible in all
situations. Keep speaker openings clear of all obstructions.
DRAFT 10 DEC 2012
DRAFT 10 DEC 2012