User's Manual

34
Settings Menu Screen
Settings Menu – Procedures
Open the Settings Menu
1. Press Menu . Settings Menu screen displays.
Assign a Pre-Defined Sensor Site Name
1. While in the Settings Menu screen, use the navigation buttons to move to and highlight
the desired channel’s “Sensor Site” setting.
2. Press Select. Pop-up menu displays.
3. Use the navigation buttons to move to and highlight the desired sensor site category.
4. Press Select. Pop-up submenu displays.
5. Use the navigation buttons to move to and highlight the desired sensor site name.
6. Press Select to save. Display returns to the Settings menu. The abbreviated sensor site
name displays below the channel number.
7. Change additional settings, press Menu twice to return to monitoring screen, or allow the
screen to time out.
Customize a Sensor Site Name
1. While in the Settings Menu screen, use the navigation buttons to move to and highlight
the desired channel’s “Sensor Site” setting.
2. Press Select. Pop-up menu displays.
3. Use the navigation buttons to move to and highlight “Custom.”
4. Press Select. Alphanumeric keyboard screen displays.
5. Enter sensor site name (maximum of 8 characters):
a. Use the navigation buttons to move to and highlight the desired character.
b. Press Select.
c. Repeat steps a and b as needed to enter the name.
6. Press down until “Save” is highlighted.
7. Press Select. Display returns to the Settings Menu screen. The custom sensor site name
displays below the channel number.
8. Change additional settings, press Menu twice to return to monitoring screen, or allow the
screen to time out.
Clear a Sensor Site Name
1. While in the Settings Menu screen, use the navigation buttons to move to and highlight
the desired channel’s “Sensor Site” settings.
2. Press Select. Pop-up menu displays.
3. Use the navigation buttons to move to and highlight “Clear.”
4. Press Select. Display returns to the Settings Menu screen. The sensor site field displays
“blank” below the channel number.
5. Change additional settings, press Menu twice to return to monitoring screen, or allow the
screen to time out.
DRAFT 10 DEC 2012
DRAFT 10 DEC 2012