Product Manual

44
Specifications
Oxygen Saturation Display Range:
0 to 100% SpO
2
Pulse Rate Display Range
18 to 321 pulses per minute (BPM)
Displays:
Pulse Quality: LED, amber
Sensor Alarm: LED, amber
Pulse Strength Bargraph: LED, bargraph, tri-color segments
Alarm Indicator: LED, bi-color
Alarm Silenced: LED, amber
Numeric Displays: 3-digit, 7-segment LEDs, green
Low Battery: LED, amber
SpO
2
Accuracy (A
rms
)
a
:
FO Sensor 70-100% ± 2 digits
Pulse Rate Accuracy (A
rms
)
a
:
No Motion ±3 digits, 18-300 BPM
Low Perfusion
±3 digits, 40-240 BPM
Alarm Volume:
High:
Low:
63dBA
52dBA
Informational Tone Volume:
High:
Low:
30dBA
26dBA
Measurement Wavelengths and Output Power:
b
Red: 660 nm @ 0.8 mW maximum average
Infrared: 910 nm @ 1.2 mW maximum average
Memory
70 hours (assuming continuous operation)
Temperature (Operating):
0º to +40º C (32º F to 104º F)
Temperature (Storage/Transportation): -30º to +50º C (-22º F to 122º F)
Humidity (Operating):
10 to 90% noncondensing
Humidity (Storage/Transportation): 10 to 95% noncondensing
Altitude (Operating):
Up to 12,000 meters (40,000 feet)
Hyperbaric Pressure Up to 4 atmospheres
Power Requirements
Mains
100-240 VAC 50-60 Hz
DC Input 12 VDC 1.5A AC adapter (in MR use battery
operation only)
Internal Power
Battery: 7.2 volt NiMH battery pack
Operating Life (fully charged battery): 30 hours minimum when 5V, 250 mA
accessory power supply is not used. 10 hours
when 5V, 250 mA accessory power supply is
used.
Storage Life: 27 days minimum
Recharge Rate: 4 hours maximum
a.) ±1 A
rms
represents approximately 68% of measurements.
b.) This information is especially useful for clinicians performing photodynamic therapy.