Product Manual

5
Displays, Indicators, and Controls
Displays, Indicators, and Controls
This section describes the displays, indicators, and controls for the Avant 9600.
Figure 1 : Avant 9600 Front and Back View
%SpO
2
Display
The %SpO
2
Display is located on the front panel of the Avant 9600 and is identified by the
%SpO
2
symbol. This display shows blood oxygen saturation, from 0 to 100 percent. The
numeric LEDs blink during SpO
2
alarm conditions.
NOTE: LED means “light-emitting diode”.
Pulse Rate Display
The Pulse Rate Display, located on the front panel of the Avant 9600, is identified by the
symbol. This display shows the pulse rate in beats per minute, from 18 to 300. The numeric
display blinks during pulse rate alarm conditions.
Numeric LEDs
Green numeric LEDs display %SpO
2
and pulse rate values. When setting
the device, the LEDs also display values for alarm limits, volume, and date
and time settings.
Red, rapidly blinking LEDs indicate a High Priority patient alarm. Values are
displayed in amber when reviewing or changing limits.
9600