User guide

ManualsBrandsNor-Lake ManualsRefrigeratorsGeneral Lab Incubator

02/12 Rev. B 138691

GENERAL LABORATORY REFRIGERATED

INCUBATOR

Installation, Operation and

Maintenance Instructions

GENERAL

Inspection 2

Location 2

Installation

General Information 3

OPERATION

Performance Data 3

Theory of Operation 3

MAINTENANCE

Troubleshooting 4

Maintenance Service & Analysis Guide 4

Summary of content (4 pages)

PAGE 1
GENERAL LABORATORY REFRIGERATED INCUBATOR Installation, Operation and Maintenance Instructions GENERAL 2 Inspection 2 Location 2 Installation 2 General Information 3 OPERATION 3 Performance Data 3 Theory of Operation 3 MAINTENANCE 4 Troubleshooting 4 Maintenance Service & Analysis Guide 4 02/12 Rev.
PAGE 2
GENERAL INSPECTION When the equipment is received, all items should be carefully checked against the bill of lading to ensure all crates and cartons have been received. All units should be inspected for concealed damage by uncrating the units immediately. If any damage is found, it should be reported to the carrier at once, and a claim should be filed with the carrier.
PAGE 3
1. Do not place any explosive, combustible or flammable materials inside the Refrigerated Incubator. 2. Do not place sealed containers in the Refrigerated Incubators. Sealed containers filled with materials do not allow for expansion and can develop dangerous vapor pressure as the temperature increases. 3. Avoid liquid spillage within the chamber. 4. Do not evaporate noxious fumes. 5.
PAGE 4
PERIODIC CLEANING Disconnect power source before servicing or cleaning. Beginning with the initial installation, the interior surfaces of the cabinet should be periodically cleaned with a solution of warm water and baking soda. This solution will remove any odors from spillage that has occurred. The exterior of the cabinet should also be cleaned frequently with a commercial grade of glass cleaner. Caution: Do not use an abrasive or alkaline solution.