Assembly Instructions

Assembly Instructions
Illustrations are for reference only.
• Due to the size of this product, we recommend
assembling it in the room intended for use.
• Check the packaging and make sure you have all
the parts listed on this sheet.
• Before use, make sure the product is fully
assembled and the screws and bolts are tightened.
• This product should only be used on firm,
level ground.
• To transport, please dismantle foundation.
Warnings
• This product is intended to support 705 lbs.
evenly distributed weight. Do not exceed this
weight.
• Keep small parts out of reach of children.
• Make sure the bed frame’s legs remain in
contact with the ground.
• Do not use this product if parts are missing,
damaged, or worn.
• Do not stand on the product.
Care Instructions
• Clean with a sponge and warm soapy water.
• Never use abrasives or chemicals to clean.
• Do not use solvent-based cleaners or detergents
as they can bleach or damage the product.
• For soft fabric beds, vacuum or brush with a soft
brush on a regular basis.
• For soft fabric beds, spot clean with a clean
damp cloth. Do not use cleaners or detergents.
30mm bolts 4mm Allen key - 1 piece 5mm Allen key - 1 piece
Footboard/headboard
(2 pieces)
Left side rail
(2 pieces)
Right side rail
(2 pieces)
Center support leg
(2 pieces)
Center support rail
(2 pieces)
Horizontal
support rail
(1 piece)
U-bracket
(1 piece)
Leg
(4 pieces)
Straight slats
(2 pieces)
IMPORTANT: Read these instructions carefully and
retain for future reference.
1
2 3
4 5 6
9
8
7
• Do not tighten screws until fully assembled and do
not over-tighten screws or bolts.
• Additional tools not included. Do not use power
tools to construct this product.
• Do not destroy the packaging until after the
product is fully assembled.
ASSEMBLY INSTRUCTIONS