SDS

Skin Protection: Protective gloves should be worn, as well as a set of resistant
coveralls and boots.
Eye Protection: Protective eyewear/goggles must be worn and be tight-fitting;
must also have side-shield.
Other Protective Equipment: Eyewash stations and safety showers should be
ready for use and nearby the handling area.
General Hygiene: Avoid contact with skin, eyes, and clothing. Remove and
launder contaminated clothing before re-use.
9. Physical and Chemical Properties
General Information
pH @70° F: 7 – 8
Water Solubility: infinite
Vapor density: >1 (air = 1)
Evaporation rate: <1 (butyl acetate = 1)
Viscosity: 400-500 cP (77 F; sp. 2 @ 100 RPM)
Specific gravity: 1.00
Flash point: N/A
Color: Clear
10. Stability and Reactivity
Stability: Stable under recommended storage conditions.
Polymerization: None under normal processing.
Conditions to avoid: Extremes of temperature and direct sunlight.
Materials to avoid: Strong acids and oxidizing agents.
Hazardous decomposition products: None reasonably foreseeable
11. Toxicological Information
Information on likely routes of exposure:
Routes of entry – inhalation: YES
Routes of entry – skin/eye: YES