Manual NORDAC SK DA-130E Decentral field system modules and frequency inverter SK DA-130E-550-340-IBS-AAA ... SK DA-130E-401-340-IBS-AAA (3~ 380 - 480V, 0.55 - 4.0kW) BU 0130 GB GmbH & Co.
NORDAC trio SK 300E Manual Notes on safety NORDAC decentral field system modules SK DA-130E and trio SK 300E frequency inverters Notes rearding safety and application (in accordance with: Low Voltage Directive (LVD) 73/23/EWG) 1. General 4. Assembly During operation, drive inverters may have live, uninsulated, maybe even moveable or rotating parts, as well as hot surfaces, depending on their type of protection.
regarding this document Documentation Name: BU 0130 DE Mat. no.: 608 13 01 Appliance series: NORDAC SK DA-130E incl. trio SK 300E List of versions Name of previous issues Date Remarks BU 0130 DE, December 2006 See BU 0300 DE First version Mat. no.: 608 13 01 / 4906 Issued by: Getriebebau NORD GmbH & Co. KG Rudolf- Diesel- Str. 1 • D-22941 Bargteheide • http://www.nord.com/ Tel.
NORDAC SK DA-130E 4 techn.
Inhaltsverzeichnis 1 General derscription .........................................................Fehler! Textmarke nicht definiert. 1.1 Delivery ........................................................................................................................................ 7 1.2 Scope of delivery .................................................................. Fehler! Textmarke nicht definiert. 1.3 European EMC directive ..........................................................................
NORDAC SK DA-130E 1 General description If enhancements, such as additional switching elements, interfaces or comfortable connection technology are required for a drive, field distributor modules are a suitsble basis for this. Combined with approved control electronics, these modules constitute a compact drive package. Field distributors are a distrubution system or energy (mains or motor-supply), control voltage, field bus connection and sensors / actuators.
NORDAC SK DA-130E 1.1 Delivery Examine this appliance for damage as a result of transport such as deformation or loose parts immediately after arrival/unpacking. In case of damage, contact the shipper at once and arrange for a thorough examination of the goods. Important! This also applies if the packaging was unadamaged. 1.2 Scope of delivery The SK DA-130E is delivered with the relevant system connections and connection points for a 3-phase motor.
NORDAC SK DA-130E 1.4 Nomenclature / Key to models The frequency inverter NORDAC trio SK 300E has the same nomenclature as the one known from other NORDAC frequency inverters. As a result of this, the information contained in this should be used along those lines. The names of the models of the frequency inverter contain the type of the appliance, its capacity, information regarding the voltage, the interference filter, the type of protection, as well as possibly any special equipment.
NORDAC SK DA-130E 2 Functional principle The field distributor module SK DA-130E is a combination of the full frequency inverter SK 300E and a platform for additional interfaces and switching elements. The frequency inverter SK 300E is the basis for a wide range of applications. Due to the high performance of this frequency inverter, applications of conveyor technology, simple pump control, as well as complex lifting applications or process control can be realised.
NORDAC SK DA-130E 3 Appliance configuration Optional: switching elements Repair switch Technology box Operation or bus (in this case InterBus) Supply ext. 24V Status LEDs Digital input and output Mounting surface for system connectors Mains In / Out Motor output with system connector Frequency inverter SK 300E Flange for cable screw connections 10 techn.
NORDAC SK DA-130E 4 Electrical connection Power cable: Connection to the mains should be carried out with a cable suitable for the local conditions and with a sufficient wire gauge (max. 4mm2). Aux. Voltage: 24V I/O: and output 2x 3 phase plug with tension-spring terminals of 2.5mm2 : voltage supply Aux. Voltage: 24V bus: and output 2x 3 phase plug with tension-spring terminals of 2.5mm2: voltage supply Cable entry: 3 x M25 and 2 x M16 are available.
NORDAC SK DA-130E 4.1 Terminals Terminal Function (Line potential) Power stack Line In (Equal to 24V Ext.) 24V-level I/O 24V-level bus Voltage supply 4mm2, 380...480V, 50...60Hz, 32 A max. Power output 4mm2, 380...480V, 50...60Hz, 32 A max. L1, L2, L3 Line Out L1, L2, L3 PE 12 Data Protective earthing conductor Line In 4mm2 24V I/O-supply 3x 2.5mm2, 15...30V, max. 6 A 24V I/O- output 3x 2.5mm2, 15...30V, max. 6 A 24V Bus supply 3x 2.5mm2, 15...30V, max. 6 A 24V Bus output 3x 2.
NORDAC SK DA-130E 4.2 Auxiliary voltage connection Two 24V sections are available as auxiliary voltage: - 24V I/O or. 24V Ext. (the same potential, supply of connecting sensors and actuators) - 24V Bus (supply of integrated bus-modules SK TU2-IBS with M8-connectors) For both sections, tension-spring terminals are available for feed-through (supply and output). Auxiliary voltage Auxiliary voltage [24V I/O] [24V Bus] Supply (equal to 24V Ext.
NORDAC SK DA-130E 4.3 M12 terminal sockets To receive drive actuators and sensors, M12 terminal sockets are available. The signals received are picked up by the frequency inverter (standard I/O) and can be used as drive function or can be transmitted to the optional bus module for controlling tasks. For the SK 130E, 7 M12 terminal sockets are available. Below is a list of the functionalities and internal links.
NORDAC SK DA-130E 4.4 Status LEDs Above the M12 terminal sockets, status LEDs have been mounted for input and output status. These are connecting sockets of 24V ext. as well as the I/Os (sensors/actuators). 4.4.1 External 24V supply For external 24V supply of the I/Os, a connection with an M12 terminal socket is available. Here, a green LED has been positioned, which shows the status of 24V Ext. or 24V I/O (the same potential). Green LED for 24V Ext.
NORDAC SK DA-130E 4.5 Control of the reversing starter SK 160E The field distributor SK DA-130E is equipped in such a way that a reversing starter SK 160 E can be controled via the terminal sockets I/O1. The SK 160E is an electronic motor starter, which can be switched to both rotational directions. The connection can be realised by 5-phase cable and a M12 terminal socket.
NORDAC SK DA-130E 4.6 System plug motor output The motor output is carried out with a system plug. In this case, it is the plug Harting HAN 10E. The configuration of this plug is as follows: PE Socket / female U 1 6 V 2 7 W 3 8 BRE (+) 4 9 TF BRE (-) 5 10 TF 4.7 Internal links For the field distributor SK DA-130E, the elements attached are connected directly with the components of the frequency inverter.
NORDAC SK DA-130E 4.8 Connection diagramme Field module SK DA-130E 24V Ext. Customer interface SK CU2-STD I/O 1 I/O 2 I/O 3 I/O 4 [22] Digital input 2 [23] Digital input 3 [24] Digital input 4 [25] Digital input 5 [14] Analogue input 1 [16] Analogue input 2 [01] Multi-functional relay [02] Multi-functional relay [17] Analogue/Digital output 1 I/O 6 I/O 5 24V 10V Frequency inverter SK 300E 24V_I/O Technology box SK TU2-IBS [1] + M8 24V GND PE Rep.
NORDAC SK DA-130E 5 Dimensions 377mm 214mm 270 mm 313 mm 340mm 160mm 160mm Depth of appliance: max. 150mm (without any connectors attached) BU 0130 DE techn.
NORDAC SK DA-130E 6 Notes on maintenance and service When handled correctly, the NORDAC SK DA-130E is maintenance-free. NOTES When service is required, it is imperative to be aware that the supply voltage of the frequency inverter is linked to the repair switch. Prior to disassembly of the frequency inverter, the repair switch must be turned off and should be secured against a restart.
NORDAC SK DA-130E 7 Technical data Function Specification Voltage 3~ 380...480V, -20% /+10%, 47...63 Hz Output voltage 3 AC 0 – supply voltage Motor output 0,55...
NORDAC SK DA-130E 8 Agencies and branches N O R D Subsidiaries, worldwide: Brazil / Brasilien NORD Motoredutores do Brasil Ltda. Rua Dr. Moacyr Antonio de Morais, 700 Parque Santo Agostinho Guarulhos – São Paulo CEP 07140-285 Tel.: +55-11-6402 88 55 Fax: +55-11-6402 88 30 info@nord-br.com Canada / Kanada NORD Gear Limited 41 West Drive Brampton, Ontario L6T 4A1 Tel.: +1-905-796 36 06 Tel.: +1-800-668 43 78 Fax: +1-905-796 81 30 info@nord-ca.
NORDAC SK DA-130E N O R D Branches in Europe: Austria / Österreich Belgium / Belgien Croatia / Kroatien Getriebebau NORD GmbH Deggendorfstr. 8 A - 4030 Linz NORD Aandrijvingen Belgie N.V. Boutersem Dreef 24 B - 2240 Zandhoven NORD Pogoni d.o.o. Obrtnicka 9 HR - 48260 Krizevci Tel.: +43-732-318 920 Fax: +43-732-318 920 85 Tel.: +32-3-4845 921 Fax: +32-3-4845 924 Tel.: +385-48 711 900 Fax: +385-48 270 494 info@nord-at.com info@nord-be.com nord-pogoni@kc.htnet.hr Czech.
NORD Branch Offices in Germany Getriebebau NORD GmbH & Co. KG Rudolf- Diesel- Str. 1 ⋅ 22941 Bargteheide Telephone 04532 / 401 - 0 Fax 04532 / 401 - 253 info@nord-de.com www.nord.com Branch Office South Getriebebau NORD GmbH & Co. KG Rudolf- Diesel- Str. 1 ⋅ 22941 Bargteheide Getriebebau NORD GmbH & Co. KG Katharinenstr. 2-6 ⋅ 70794 Filderstadt- Sielmingen Telephone 04532 / 401 - 0 Fax 04532 / 401 - 253 Telephone 07158 / 95608 - 0 Fax 07158 / 95608 - 20 NL-Bargteheide@nord-de.
