Manual

SK 200E Manual for frequency inverters
24 Subject to technical alterations BU 0200 GB-4411
2.1.2 Adapters for Different Motors
In some cases, the terminal box attachments are different for different sizes of motor. Therefore, it may be
necessary to use an adapter to mount the frequency inverter.
In order to guarantee the maximum protection class IP55 / IP66 of the entire unit, motor must also have a
corresponding protection class.
NORD motor
sizes
Add-on
SK 2xxE Size 1
Add-on
SK 2xxE Size 2
Add-on
SK 2xxE Size 3
Add-on
SK 2xxE Size 4
Size 63  71
with adapter kit I
Not possible
Not possible
Not possible
Size 80  112
Direct mounting
Direct mounting
with adapter kit II
Not possible
Size 132
Not possible
Not possible
Direct mounting
with adapter kit III
Size 160-180
Not possible
Not possible
Not possible
Direct mounting
Overview of adapter kits
Name
Add-on SK 2xxE
Part No.
Adapter kit size 63-71 to KK80-112
(Adapter kit I)
Adapter plate, terminal box frame seal and screws
275119050
SK TI4-3 adapter kit_80-112
(Adapter kit II)
Adapter plate, terminal box frame seal and screws
275274321
SK TI4-4 adapter kit_132
(Adapter kit III)
Adapter plate, terminal box frame seal and screws
275274320
Adapter plate, Part No. 011015410
Seal, Part No. 13097000
Motor Size 71
Adapter unit SK TI4
Example
NOTE
The adaptability of motors from other manufacturers must be checked individually!
Information for the conversion of inverter-controlled drive units to the SK 2xxE can be found in
BU0320.