User Manual

3. Getting started: Selecting Programs NORD ELECTRO 2 V2.2x
Page 12
3. GETTING STARTED
SELECTING PROGRAMS
Programs are single sounds that are stored in the internal memory of Nord Electro 2. The Program mem-
ory in Nord Electro 2 consists of 6 Banks each holding 8 Programs for a total of 48 Programs. All Programs
can be edited and replaced at any time. To select a Program for playing/editing, do like this:
1. Select Bank (A-F) by pressing
the U
P/DOWN NAVIGATOR
buttons if you want to change
Bank.
2. Select Program by pressing one
of the eight P
ROGRAM buttons
1 to 8.
OCTAVE SHIFT
The two OCTAVE SHIFT buttons to the bottom left on the front panel
can be used to transpose the notes two octaves up or down (if the se-
lected instrument supports this). A flashing O
CTAVE SHIFT LED indi-
cates +/- 2 octaves note shift.
Note: Due to the actual key range of the original Piano instru-
ments, some sounds cannot be octave shifted up and/or down. For organ sounds, the Octave Shift
will only generate notes that are within the 73-key note range of Nord Electro 2 73. This means
that using Octave Shift for Organ sounds in Nord Electro 2 73 won’t produce any sound in the
lowest or highest octave.
Press one of the eight
PROGRAM buttons to
select a Program to play.
The corresponding LED
will light up.
Press the UP or DOWN
NAVIGATOR buttons to
select Program Bank A-F.