User Manual

5. Panel reference: The left panel section NORD ELECTRO 2 V2.2x
Page 32
OUTPUT LEVEL
The OUTPUT LEVEL knob controls the individual output volume for each Program.
It’s fully programmable for each Program and sends/receives MIDI CC# 7 (Main
Volume).
Note: The Output Level is always active even if no other sub groups of the Ef-
fects section are active.
TREBLE & BASS
The last group of the effects section is a 2-band equalizer which features controls for
bass and treble. Activate or deactivate the equalizer by pressing the O
N button. Ad-
just the treble and bass with the corresponding K
NOBS. The bass and treble settings
are fully programmable for each Program.
THE LEFT PANEL SECTION
The left panel section features controls for Program
handling, system functions, MIDI functions etc.
There, you’ll also find the Octave Shift and Trans-
pose functions.
MASTER LEVEL
The MASTER LEVEL knob controls the output level
from the two O
UT jacks and the HEADPHONES out-
put. The M
ASTER LEVEL knob does not send or
receive any MIDI CC# but is used to control the
entire instrument’s output level. (For info on how
to control the level(s) of the individual sounds and via
MIDI, please refer to “Output Level” on page 32).
NAVIGATOR BUTTONS
The UP and DOWN NAVIGATOR buttons are used
for selecting Program Banks (A-F) and also for se-
lecting system related functions (see “System func-
tions” on page 33).
DISPLAY
The DISPLAY is mainly used for displaying Program Banks and Program numbers. It also displays system
related functions described in the ‘System functions’ paragraph below.