User Manual

NORD ELECTRO 2 V2.2x 5. Panel reference: System functions
Page 35
back incoming MIDI data, Nord Electro 2 will respond normally to your playing and knob tweaking via
the MIDI “loop”. If you use Local On in the sequencer setup described above, you will get double-notes
when you play: from the keyboard internally and via the MIDI “loop”. This is not what you want. There-
fore, always use Local Off together with sequencers.
Select Local On or Local Off with the U
P/DOWN NAVIGATOR buttons. Press any button (except for the
S
HIFT, STORE or UP/DOWN buttons) to exit. Note that ‘Local Off’ is not saved, so you will have to
reconfigure after power off.
TUNE
The Master Tune function is global for all sounds in Nord
Electro 2, i.e. changing it will affect all Programs. Press the
S
HIFT + PROGRAM 4 (TUNE) buttons to enter the Master
Tune function.
1. Change the master tune, in cents, with the U
P/DOWN
N
AVIGATOR buttons. ‘0’ is normal 440Hz tuning. The
range is +/- 1 semitone in steps of 1 cent (hundreds of a
semitone).
2. Press any button (except for the S
HIFT, STORE or UP/
D
OWN buttons) to exit.
MEM LOCK
Press the SHIFT + PROGRAM 5 (MEM LOCK) buttons to
enter the Memory Lock function. Here you can choose to
memory protect all Programs of the internal memory. Select
Memory Protect ‘On’ or ‘OF’ with the U
P/DOWN NAVIGA-
TOR
buttons. Press any button (except for the SHIFT, STORE
or U
P/DOWN buttons) to exit.
Note! When Nord Electro 2 is shipped from factory,
Memory Lock is set to ‘On’. To be able to store Programs
(and receive MIDI Sysex dumps), set Memory Lock to
‘OF’.