User's Manual

22 (23)

2011-06-29

NUR-05W Implementation Guide v0.7

CONFIDENTIAL

7.2.2

Labeling Requirements

The end product must be labeled in a visible area as follows:

“Contains Transmitter Module FCC ID: SCCNUR05W”

“Contains FCC ID: SCCNUR05W”

7.2.3

Approved Antennas

Option 1:

Manufacturer: HUBER-SHUNER

Antenna Description: RFID Reader Antenna; Polarization: linear

vertical; Frequency range: 902-928MHz

Manufacturer Part Number: SPA-915/70/8/0/V

Gain: 8 dBi

Option 2:

Manufacturer: Nordic ID

Antenna Description: RFID Reader Antenna; Linear polarization: dipole;

Frequency range: 902-928MHz

Manufacturer Product Name: Nordic ID Merlin UHF RFID

Gain: 2 dBi

Option 3:

Manufacturer: Nordic ID

Antenna Description: RFID Reader Antenna; Cross polarization: dipole;

Frequency range: 902-928MHz

Manufacturer Product Name: Nordic ID Merlin Cross Dipole UHF RFID

Gain: 5 dBi

7.3 Industry Canada

Demonstrating the compliance is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including interference that may

cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a

type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce

potential radio interference to other users, the antenna type and its gain should be so chosen that

the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful

communication.