User's Manual

23 (23)
2011-06-29
NUR-05W Implementation Guide v0.7
CONFIDENTIAL
To leverage the Nordic ID’s IC grant, the device with the integrated NUR-05W module shall be met the
following conditions:
1. The antenna used with the NUR-05W module must be installed so that the distance of the
antenna from all persons can be maintained at least 20 cm in every situation.
2. The antenna(s) used with the NUR-05W module must not be collocated in conjunction with any
other antenna or transmitter that is capable of transmitting at the same time.
When the conditions above are met, typically no transmitter testing is required, although the OEM
integrator shall demonstrate that the end-product is in compliance with the other regulatory
requirements.
There is no user’s documentation requirements other than that the required FCC statements outlined
in the FCC section are in a prominent place in the user’s guide.
7.3.1
Labeling Requirements
The end product must be labeled in a visible area as follows:
“Contains IC: 5137A-NUR05W”
7.3.2
Approved Antennas
This radio transmitter 5137A-NUR05W has been approved by Industry Canada to operate with the
antenna types listed below with the maximum permissible gain and required antenna impedance for
each antenna type indicated. Antenna types not included in this list, having a gain greater than the
maximum gain indicated for that type, are strictly prohibited for use with this device.
Manufacturer: HUBER-SHUNER
Antenna Description: RFID Reader Antenna; Polarization: linear
vertical; Frequency range: 902-928MHz
Manufacturer Part Number: SPA-915/70/8/0/V
Gain: 8 dBi
Impedance: 50Ω