User Guide

Table Of Contents

2013‐09‐27

NUR‐05WL2ImplementationGuidev1.1



ToleveragetheNordicID’sICgrant,thedevicewiththeintegratedNUR‐05WL2moduleshallbemetthe

followingconditions:

1.TheantennausedwiththeNUR‐05WL2modulemustbeinstalledsothatthedistanceoftheantenna

fromallpersonscanbemaintainedatleast20cmineverysituation.

2.Theantenna(s)usedwiththeNUR‐05WL2modulemustnotbecollocatedinconjunctionwithanyother

transmitteroritsantennathatiscapableoftransmittingatthesametime,exceptthetransmitter‐antenna

configurationsthatarewithinthelimitsoftheNUR‐05WL2’sICgrant.

3.The designofan antennacircuit tracelayout in ahost shallcomplywith theOEM designinstructions

provided.



When the conditions above are met, typically no transmitter testing is required, although the OEM

integratorshalldemonstratethattheend‐productisincompliancewiththeotherregulatoryrequirements.



Thereisnouser’sdocumentationrequirementsotherthanthattherequiredFCCstatementsoutlinedinthe

FCCsectionareinaprominentplaceintheuser’sguide.



LABELLINGREQUIREMENTSFORTHEHOSTDEVICE

Theendproductmustbelabeledwiththefollowingidentificationinformationinavisiblearea:

“ContainsIC:5137A‐NUR05WL2”



CERTIFIEDANTENNAS

This radio transmitter 5137A-NUR05WL2 has been approved by Industry Canada to operate with

the antenna types listed below with the maximum permissible gain and required antenna

impedance for each antenna type indicated. Antenna types not included in this list, having a gain

greater than the maximum gain indicated for that type, are strictly prohibited for use with this

device.



Option1:

Manufacturer: Nordic ID

Antenna Description: Circular polarized patch antenna

Frequency range: 902 – 928 MHz

Manufacturer Part Number: Sampo S0

Gain: 7dBi

  