User's Manual

2016-03-18

NUR-10W HW Implementation Guide v1.4

Figure 8. Read range limited by RSSI filter (100mW TX power and 0dBi antenna gain)

6.6 DYNAMIC POWER SAVE MODES

NUR-10W module has power save modes which can be enabled via SW API. By default the power save is ON

with depth of 100ms. Other depths are 500ms and 1000ms. The power save mode works in a way that

when module reads continuously (applies only when using inventory stream -command) it goes to sleep if

there is no tags in the field. The sleep time is defined by the depth value. After the sleep period it starts to

read again. If there is one or more tags in the field the module will not go into sleep.