User's Manual

37
2016-03-18
NUR-10W HW Implementation Guide v1.4
-delta T on assembly max. 10°C at end of
preheating
Soldering phase
-total duration 190s
-max. time above 217°C (mp.) 30s
-Tpeak max. 235°C, measured at module bottom
-Tpeak max. 225°C, measured at motherboard
surface, under module
Cooling
Two-stage, double sided cooling recommended
1
st
stage: 2-5°C/s cooling until melting point
2
nd
stage: 1-3°C/s after melting point