User's Manual

Nordic ID PL3000 user manual, v. 2.6, October 2006 100

Appendix F Creating Option GPRS connection

When the GPRS card is installed the device recognises the card when the PL3000 is turned on. The text

“Pin Driver, registering to network” appears on the display” to take the GPRS card into use.

From the Startup menu select network and dial up connections. Choose the GPRS, connection, select the

modem and choose Globetrotter and click “OK”

Set the API to Internet from the “API” software in the control panel.

When starting the browser or otherwise establishing the connection, a dial-up window appears in the display.

If needed the password and username are supplied by the network operator.

Depending on the actual SIM card and network provider you may need to manually change the settings.

For the correct settings consult your network provider. If the automatic IP settings are not supported you

may need to set the DNS server IP address manually. Settings/network and dial up connections, GPRS

connections, properties, TCP/IP settings/name servers primary and secondary DNS. Click “OK” to save the

settings