User's Manual

©2006 Nordic ID Oy
Nordic ID PL3000 user manual, v. 2.6, October 2006 102
• To control the device hardware you will need to use the MHL interface. The partner support section on the
Nordic ID website has details about MHL available.
• Additionally the general Windows CE .NET 4.2 SDK is good to have installed.
All of these tools are free and available from the Nordic ID SDK site, except the eMbedded Visual C++ 4.0
application. It is available free of charge from Microsoft.
.NET Compact 1.1 framework application development
• ActiveSync 3.7 or later installed on your host PC.
• Microsoft Visual Studio .NET 2003 with the Compact Framework package installed
• The PL3000 Windows CE 4.2 SDK installed.
• To control the PL3000 hardware you will need the MHL .NET wrapper class. This is available from Nordic
ID on request.
.NET Compact 2.0 framework application development
• ActiveSync 3.7 or later installed on your host PC.
• Microsoft Visual Studio .NET 2005
• The PL3000 Windows CE 4.2 SDK installed.
• To control the PL3000 hardware you will need the MHL .NET wrapper class. This is available from Nordic
ID on request.
HTML + J Script / VBScript Application development
As this type of solution uses the Internet Explorer 6.0 application on the PL3000, no third party development
tools are explicitly required. PL3000 specifi c hardware features are only available by calling a COM component
trough a client side script in your solution. This COM component is actually the same MHL component used
in all the languages above, but exposed trough a COM component wrapper. The MHL SDK documentation
is available from the Nordic ID partner support webpage. You do not need to download and install the SDK
for this type of solution.