User's Manual

Nordic ID PL3000 user manual, v. 2.6, October 2006 104

Networks within reach are listed below Add New… -selection.

Note: If the network is conﬁ gured as not visible, it cannot be seen in this window. Open the network

conﬁ guration window by tapping the desired network or Add New…-selection in the listbox . Fill the

wireless properties with the information provided by your network administrator. Save the settings and

close the window by tapping the OK-box at the top of the window.

After conﬁ guring the wireless properties, choose the network to be connected from the listbox and tap the

connect -button. The PL3000 tries to connect the selected network and indicates the connection status

at the window below the Available networks –listbox. Also the signal strength of the selected network is

shown.

Network Monitor window

The Network monitor application can be opened from Programs – WCF54G Wireless Network Monitor.

This application shows the status of the current network connection, tools for network management and

troubleshooting and controls for wlan radio power.

Fig: Detected networks in range. NID_

WLAN is being connected. Authori-

sation process in progress.

Fig: Wireless properties -window. Enter

the network settings here.

Fig: Network monitor -window.