User's Manual

Nordic ID PL3000 user manual, v. 2.6, October 2006 111

- Diagnostics: Attempt to (re)connect to an AP, and provide a more thorough dump of data than is

obtained with (Re)connect. The dump will include radio state, conﬁ g settings, global settings, and

a BSSID list of APs in the area. In addition to displaying the diagnostic information on the Diags

window, SCU will save the information to the ﬁ le “_sdc_diag.txt” in the Windows directory.

- Site Survey: Launch a separate site survey utility (not yet available).

Global Settings Window

Global settings include:

- Radio and security settings that apply to all conﬁ gs

- Settings that apply to SCU itself

An administrator can deﬁ ne and change most global settings on the Global Settings window in SCU. A

sample Global Settings window is shown in Figure 3 below:

Figure 3: Global Settings window

When a global setting is changed on the window and the Commit button is tapped, the change may not take

effect until the device is power cycled.

A few global settings can be deﬁ ned or set only through a separate utility such as the Summit Manufacturing

Utility, which is made available only to device manufacturers and not to their customers.