User's Manual

Nordic ID PL3000 user manual, v. 2.6, October 2006 52

The device can be set to play a sound when requested a PIN-code authentication by a remote device. The

sound can be chosen by pressing the … -button and browsing the appropriate wave-ﬁ le from the opened

ﬁ le selection dialog. The selected ﬁ le can be played by pressing the > -button by the ﬁ le selection dialog

–button. Close closes the Advanced –window.

The changes are taken into use by pressing the apply-

button.

Scan

The Scan -tab page contains the tools for discovering

the devices and services in it. The “Scan devices in

range” –button scans the discoverable devices into

range of the PL3000. The scanning may take a while

and the devices within the range are shown at the

Devices: -window. The devices are shown by their type

and their friendly name. The information of the status of

the connection to that device is shown after the friendly

name of the device.

Fig.53 NID BT Manager General -tab page Fig.54 General -tab page advanced options

Fig.55 Scan -tab page of the NID BT Manager