User's Manual

©2006 Nordic ID Oy
Nordic ID PL3000 user manual, v. 2.6, October 2006 53
By selecting the device at the “Device:” -window the NID BT-manager scans the services in that device. The
services found are displayed at the Services –window. Currently the NID BT-manager shows only the Serial
Port –service.
When tapping the name of the device into Device-window the additional selection window pops up. Select
Pair to set up a secure connection to the device. Note that the PIN-number set to same for both devices.
The Bluetooth PIN code is 1-8 bytes long (8-128 bits) Personal Identifi cation Number. However, most devices
use PIN sizes of 4 decimal digits.
By selecting the service by tapping it, the PL3000 opens the confi guration window for that service. The
service confi guration window includes the checkboxes for automatic startup after power up, secure
connection and authentication.
The additional settings of the Service confi guration -window includes the Com port mapping to the service.
The serial port profi le can be set to create Activesync link. Link creation is explained at Services chapter.
Services
This tab-page shows the discovered services in the local and remote devices. The services at the remote
devices are shown at the Client services –window. The Local services –window shows the services on the
PL3000.
Fig.56 Services found on discovered device Fig.57 Service properties