User's Manual

©2006 Nordic ID Oy
Nordic ID PL3000 user manual, v. 2.6, October 2006 61
6.5.10 Keyboard
The keyboard properties dialogue allows you to enable or disable the character repeat function for the
keyboard and set the repeat delay and rate. The character repeat function means that when you hold a
keyboard key down, that keystroke will be sent repeatedly to the application. The repeat delay value defi nes
how long it takes after a key press before repeat function is triggered. The repeat rate value defi nes how fast
new key down events are sent once the function is triggered.
6.5.11 Mouse
With this function you can calibrate the speed and accuracy of the double tap function of stylus . For details
see the chapter 6.5.21.
6.5.12 Network and Dial-up Connections
This dialogue contains all active network and potential dialup connections that have been confi gured. To
activate a connection, doubletap it. To confi gure a connection either tap the connection once and select
properties from the ‘Connection’ menu or hold down the ‘alt’ key and tap the connection and select properties
from the menu that appears. You can create new connections by doubletapping ‘Make New Connection’.
By default, there are usb and GPRS connection defi ned. The fi rst is used when forming an ActiveSync
connection to a host PC. The GPRS connection is predefi ned for use with the Option Globetrotter GPRS
or Combo card, and will work as is in most countries and with most operators. If your operator requires a
different dialstring to ‘*99#’ or a AP name different to ‘internet’ this profi le will not work without defi ning any
neccessary operator specifi c settings fi rst.