User's Manual

Nordic ID PL3000 user manual, v. 2.6, October 2006 63

Then choose, if desired, the action id number. Modiﬁ er (shift, alt or function) and virtual key to be mapped

to. The misc –tab has controls to the input mode selection (123, abc or ABC), Scan mode –selection ( and

the control of the lights of the input mode keys.

The conﬁ gured keymappings can be saved as a proﬁ le or to system default.

6.5.16 NID Power Button

Fig.66 Mapping-tab

Power button conﬁ guration program is for conﬁ guring the power-key behavior. The default function of the

power-key is to open the shutdown menu but it can be mapped to execute any program. After the holding

the power-key for a “hold time” (in milliseconds) the PL3000 goes to suspend mode.

The power-key can also be mapped to function as any virtual key.

The conﬁ gured power-key behavior can be saved as a proﬁ le or to system default.

6.5.17 NID Scanner

The scanner conﬁ guration –program is for conﬁ guring the scanner functions. The program has 4 tab pages;

Codes, Misc, Scan and Proﬁ les.

The actions to the keys are set from Mapping-tab below the Actions.

There are 50 action identiﬁ ers and each of them can be set to launch an

external program. First set and action id number (1-50) and then browse

the selected action. The parameters can be written after the selected

executable.