User's Manual

©2006 Nordic ID Oy
Nordic ID PL3000 user manual, v. 2.6, October 2006 73
The Unlock Code fi eld allows you to specify a text string password that must be entered by the user in
order to dismiss the LinkWatchdog User Interface component. If the LWD service manages to re-establish
the network link, the UI program will automatically shut down and disappear. No password is needed in
this case, and the user may continue using the device normally. If the network link is not re-established
the UI application will show a message informing the user that the network is currently down. There is a
“Retry” and a “Quit” button that the user may press in this state. If you specify an unlock code, the user
must enter that text string correctly in order to close the UI application. To disable the unlock code, clear
the fi eld so that it contains no characters.
The Activate Sound fi eld specifi es a wave fi le that
will be played when the LWD service launches the UI
application. The Connect Sound is played when the
LWD service determines that the network link has
been re-established.
The Retry and Quit button text fi elds specify what
button labels appear on the retry and quit buttons in
the UI application. This is so that you may customize
the user interface to use your local language. The
appearance customization settings continue on page
3.